Manufacturers & Exporters of Oil Coolers

 Oil Coolers Manufacturers & Exporters

Heat exchangers are designed and manufactured with best possible economy and efficiency obtained by way of continuous field tests. oil coolers are among other heat exchangers and can be duly designed & manufactured if only we could have information to the conditions of its use. Oil Coolers are used to absorb heat from pressurised working oil to maintain proper temperature and viscosity of oil. The modem trend is to install water cooled oil coolers with machines using pressurised oil system.

Oil coolers are available in fixed tube sheet and floating tube sheet type construction with horizontal or vertical orientation. in general heavy gauge steel pipe shell with seamless copper tubes and cast iron covers are used in construction. other material of construction can be used if required. Abjured. Adjustable legs are for installation in any position and location.

Oil coolers find their application in hydraulic machines. transformers. machine tools. transmission systems. quench oil systems and many other similar applications. Hundreds of Oil coolers are in use and have proved to be dependable. the proof for accepting our oil coolers is the fact that so many equipment manufacturers in various fields have been using our our oil coolers for years and consistently specify for their requirements. We have designed. manufactured

and supplied oil coolers up to 2500 LPM flow rate (4.50.000 Kcal/Hr). After constant use for considerable time if performance deteriorates. Scale and dirt deposits can be responsible for this. in such cases cleaning is necessary. in event of any such performance deviation. you are advised to contact our office for proper guidance.

Conventional oil coolers are available from 3/8" diameter copper tubes. Though these oil coolers are compact in size and perhaps with lower prices. the smaller diameter (3/8"oD) tubes are prone to getting blocked on water side (water in tube) by dirt. scaling etc. very frequently. this requires water side cleaning very frequently.this means more maintenance and shorter life. in our oil coolers. we use 5/8" diameter tubes to avoid water side blocking by dirt. scaling etc. in using our oil coolers. you are rewarded with less maintenance and longer life of our oil coolers.

We can also design. manufacture and supply oil coolers for any flow rates and in-out temperature conditions. standard horizontal or vertical oil coolers are standardised for 57'C TO 50'C TO 45'C oil in/out temperature conditions width water inlet temp 30'C . Our standard oil coolers are tested at 25 Kg / CM2g pressure on oil side and at 10 Kg / CM2g Pressure on water side.